Elektrisch Umrechner
Zwischen elektrischen Einheiten (Strom, Potenzial, Widerstand, Kapazität, Induktivität) umrechnen.
Wird umgerechnet...
Informationen zur Einheit
Ampere (A)
Definition: Die SI-Basiseinheit des elektrischen Stroms.
Geschichte: Benannt nach dem französischen Physiker André-Marie Ampère.
Aktuelle Verwendung: Standardeinheit zur Messung des elektrischen Stroms.
Kiloampere (kA)
Definition: Eine elektrische Stromeinheit gleich 1000 Ampere.
Geschichte: Für Hochstromanwendungen verwendet.
Aktuelle Verwendung: In industriellen und Energiesystemen verwendet.
Milliampere (mA)
Definition: Eine elektrische Stromeinheit gleich einem Tausendstel Ampere.
Geschichte: Für kleine Strommessungen verwendet.
Aktuelle Verwendung: Häufig in der Elektronik und medizinischen Geräten.
Mikroampere (μA)
Definition: Eine elektrische Stromeinheit gleich einem Millionstel Ampere.
Geschichte: Für sehr kleine Strommessungen verwendet.
Aktuelle Verwendung: In Präzisionselektronik und Sensoren verwendet.
Nanoampere (nA)
Definition: Eine elektrische Stromeinheit gleich einem Milliardstel Ampere.
Geschichte: Für extrem kleine Strommessungen verwendet.
Aktuelle Verwendung: In fortgeschrittener Elektronik und Forschung verwendet.
Volt (V)
Definition: Die SI-Einheit der elektrischen Potentialdifferenz.
Geschichte: Benannt nach dem italienischen Physiker Alessandro Volta.
Aktuelle Verwendung: Standardeinheit zur Messung der Spannung.
Millivolt (mV)
Definition: Eine elektrische Potentialeinheit gleich einem Tausendstel Volt.
Geschichte: Für kleine Spannungsmessungen verwendet.
Aktuelle Verwendung: Häufig in der Elektronik und Messtechnik.
Kilovolt (kV)
Definition: Eine elektrische Potentialeinheit gleich 1000 Volt.
Geschichte: Für Hochspannungsanwendungen verwendet.
Aktuelle Verwendung: In der Energieübertragung und -verteilung verwendet.
Megavolt (MV)
Definition: Eine elektrische Potentialeinheit gleich einer Million Volt.
Geschichte: Für sehr hohe Spannungsanwendungen verwendet.
Aktuelle Verwendung: In Teilchenbeschleunigern und Hochenergiephysik verwendet.
Mikrovolt (µV)
Definition: Eine elektrische Potentialeinheit gleich einem Millionstel Volt.
Geschichte: Für sehr kleine Spannungsmessungen verwendet.
Aktuelle Verwendung: In Präzisionselektronik und medizinischen Geräten verwendet.
Farad (F)
Definition: The SI unit of electrical capacitance.
Geschichte: Named after Michael Faraday.
Aktuelle Verwendung: Measures capacitor capacity in electrical circuits.
Millifarad (mF)
Definition: A unit of capacitance equal to one thousandth of a farad.
Geschichte: Metric submultiple of the farad.
Aktuelle Verwendung: Used for relatively large capacitors compared to microfarads.
Microfarad (μF)
Definition: A unit of capacitance equal to one millionth of a farad.
Geschichte: Very common in electronics.
Aktuelle Verwendung: Typical value for signal and power capacitors.
Nanofarad (nF)
Definition: A unit of capacitance equal to one billionth of a farad.
Geschichte: Metric submultiple of the farad.
Aktuelle Verwendung: Used in filters and higher-frequency circuits.
Picofarad (pF)
Definition: A unit of capacitance equal to one trillionth of a farad.
Geschichte: Metric submultiple of the farad.
Aktuelle Verwendung: Used for high-frequency and RF capacitors.
Henry (H)
Definition: The SI unit of electrical inductance.
Geschichte: Named after American scientist Joseph Henry.
Aktuelle Verwendung: Measures inductance of coils and inductors.
Millihenry (mH)
Definition: A unit of inductance equal to one thousandth of a henry.
Geschichte: Metric submultiple of the henry.
Aktuelle Verwendung: Common in signal and power filters.
Microhenry (μH)
Definition: A unit of inductance equal to one millionth of a henry.
Geschichte: Metric submultiple of the henry.
Aktuelle Verwendung: Used in high-frequency and RF circuits.
Nanohenry (nH)
Definition: A unit of inductance equal to one billionth of a henry.
Geschichte: Metric submultiple of the henry.
Aktuelle Verwendung: Used in RF and microwave components.
Ohm (Ω)
Definition: The SI unit of electrical resistance.
Geschichte: Named after German physicist Georg Ohm.
Aktuelle Verwendung: Used to measure resistance of components and circuits.
Milliohm (mΩ)
Definition: A unit of electrical resistance equal to one thousandth of an ohm.
Geschichte: Metric submultiple of the ohm.
Aktuelle Verwendung: Used for very low resistance measurements.
Kiloohm (kΩ)
Definition: A unit of electrical resistance equal to one thousand ohms.
Geschichte: Metric multiple of the ohm.
Aktuelle Verwendung: Common in electronics and analog circuits.
Megaohm (MΩ)
Definition: A unit of electrical resistance equal to one million ohms.
Geschichte: Metric multiple of the ohm.
Aktuelle Verwendung: Used for high-resistance materials and insulation.
Siemens (S)
Definition: The SI unit of electrical conductance; the reciprocal of the ohm.
Geschichte: Named after Werner von Siemens.
Aktuelle Verwendung: Used to measure conductance of circuits and solutions.
Millisiemens (mS)
Definition: A unit of conductance equal to one thousandth of a siemens.
Geschichte: Metric submultiple of the siemens.
Aktuelle Verwendung: Common in solution conductivity and electronics.
Microsiemens (μS)
Definition: A unit of conductance equal to one millionth of a siemens.
Geschichte: Metric submultiple of the siemens.
Aktuelle Verwendung: Used for very low conductance measurements (e.g., water quality).
Mho (℧)
Definition: An older name for electrical conductance (now siemens); reciprocal of the ohm.
Geschichte: Historically used before adoption of the siemens.
Aktuelle Verwendung: Occasionally appears in legacy literature.
Alle Einheitenumrechnungen
Wusstest du schon?
- Ohm measures electrical resistance.
- Farad measures electrical capacitance.
- Henry measures electrical inductance.
Verwandte Kategorien
Häufige Umrechnungen
Convert Volts to Millivolts
V * 1000
Convert Amperes to Milliamperes
A * 1000